Konica-minolta Fujitsu Scanner Manual do Utilizador

Operator's Guidefi-4860C2 Image ScannerP3PC-1692-01ENZ0

●viii Note, LiabilityREAD ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT.IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUS

3-143.3 Cleaning the Rollers Cleaning the Brake roller unit1. Remove documents from the stacker. Pull up the lever on the right front of the Upper tr

3-153.3 Cleaning the Rollers3DAILY CARE2. Pull the ADF release lever toward you and lift up the ADF sheet guide. 3. Pressing down on the upper part of

3-163.3 Cleaning the Rollers4. Turn the bail of the Brake roller upward and release the lock. 5. Pull the Brake roller toward you to remove it. BailBr

3-173.3 Cleaning the Rollers3DAILY CARE6. Wipe the Brake roller unit using a lint free cloth moistened with cleaner F1. 7. Re-install the Brake roller

3-183.3 Cleaning the Rollers Cleaning the Feed rollers1. Remove documents from the stacker. Pull up the lever on the right front of the Upper transpo

3-193.3 Cleaning the Rollers3DAILY CARE2. Wipe the metal feed rollers using a lint free cloth moistened with cleaner F2. Wipe the rollers thoroughly.

3-203.3 Cleaning the Rollers Cleaning the Pinch rollers1. Remove documents from the stacker. Pull up the lever on the right front of the Upper transp

3-213.3 Cleaning the Rollers3DAILY CARE2. Wipe the pinch rollers using a cloth moistened with cleaner F1. 3. Lift the Upper transport unit to release

3-223.4 Cleaning the Transport Path3.4 Cleaning the Transport Path Cleaning the Transport path 1. Remove documents from the stacker first. Pull up t

3-233.4 Cleaning the Transport Path3DAILY CARE2. Wipe and clean the whole transport path using a cloth moistened with cleaner F1. 3. Lift the Upper tr

●ix PrefaceSafety PrecautionsThis manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manu

3-243.5 Cleaning the Discharge Brush3.5 Cleaning the Discharge Brush 1. Remove documents from the stacker. Pull up the lever on the right front of the

3-253.5 Cleaning the Discharge Brush3DAILY CARE2. Pull the ADF release lever toward you and lift up the ADF sheet guide. 3. Slide the Pick roller unit

3-263.5 Cleaning the Discharge Brush4. Pressing down on the upper part of the Guide plate with your fingers at the two positions shown and then rotate

3-273.5 Cleaning the Discharge Brush3DAILY CARE6. Pull the Brake roller unit toward you to remove it.7. Using a dry cloth, wipe off the dust from the

3-283.5 Cleaning the Discharge Brush9. Install the Guide plate in the reverse order of the removal. You should push it down and rotate back then the i

3-293.6 Cleaning the Glass Surface3DAILY CARE3.6 Cleaning the Glass Surface Cleaning of the removable sheet guide 1. Remove documents from the stack

3-303.6 Cleaning the Glass Surface2. Use your index fingers to lift both ends of the removable sheet guide. 3. Lift the right side first.4. Shift the

3-313.6 Cleaning the Glass Surface3DAILY CARE5. Wipe the both sides of the glass surface using a clean lint free cloth moistened with cleaner F1. 6. A

3-323.6 Cleaning the Glass Surface Cleaning the Glass Sheet Guide 1. Remove documents from the stacker. Pull up the lever on the right front of the U

3-333.6 Cleaning the Glass Surface3DAILY CARE2. Push down on the Glass sheet guide tab to open the Glass sheet guide. This picture is side View.Glass

●xSymbols Used In This ManualThis manual uses the following symbols in explanations in addition to warning indications.ATTENTIONThis symbol alerts ope

3-343.6 Cleaning the Glass Surface3. Wipe the Glass sheet guide using a clean lint free cloth moistened with cleaner F1.4. Lift the tabs until the Gui

3-353.7 Cleaning the Sensors3DAILY CARE3.7 Cleaning the Sensors Cleaning the document width detection sensors (6 positions) 1. Remove documents from

3-363.7 Cleaning the Sensors2. Pull the ADF release lever toward you and lift up the ADF sheet guide. 3. Hold the ADF sheet guide with your hand to ke

3-373.7 Cleaning the Sensors3DAILY CARE Cleaning the SF0 sensor and SF1 sensor. 1. Remove documents from the stacker. Pull up the lever on the right

3-383.7 Cleaning the Sensors2. Pull the ADF release lever toward you and lift up the ADF sheet guide. 3. Hold the ADF sheet guide with your hand to ke

3-393.7 Cleaning the Sensors3DAILY CARE Cleaning the SF1.5 sensor and SF2 sensor1. Remove documents from the stacker. Pull up the lever on the right

3-403.7 Cleaning the Sensors2. Wipe SF1.5 and SF2 sensor surfaces with a clean lint free cloth moistened with cleaner F1. 3. Lift the Upper transport

3-413.8 Cleaning the Lamps3DAILY CARE3.8 Cleaning the Lamps Front-side lamp 1. Remove documents from the stacker. Pull up the lever on the right fro

3-423.8 Cleaning the Lamps2. Push down on the Glass sheet guide tab to open the Glass sheet guide. This picture is side View.Glass sheet guide

3-433.8 Cleaning the Lamps3DAILY CARE3. Pull down on the tab to release the Lamp socket covers attached to the both ends of the Lamp to remove them. 4

●xiScreen Examples In This ManualThe screen examples in this manual are subject to change without notice in the interest of product improvement.If the

3-443.8 Cleaning the Lamps5. Clean the clear portion of the Lamp with a clean lint free dry cloth. 6. Attach the front-side Lamp in the reverse order

3-453.8 Cleaning the Lamps3DAILY CARE7. Attach the Lamp socket cover in the reverse order of its removal. Engage the socket cover hook to the Lamp fra

3-463.8 Cleaning the Lamps Back-side lamp 1. Push back blue latch to release the side cover, then open. 2. Hold the handle (blue part) and pull the B

3-473.8 Cleaning the Lamps3DAILY CARE3. Rotate the Lamp a half turn so that the terminals on each end align with the slot on the Lamp socket and remov

3-483.8 Cleaning the Lamps5. Install the Back-lamp unit in the reverse order of its removal. Make sure that the clear portion of the Lamp faces up. 6.

4-14 REPLACEMENT OF CONSUMABLESThis chapter describes how to replace consumables.4.1 Consumables and Replacement Cycle...4-

4-24.1 Consumables and Replacement Cycle4.1 Consumables and Replacement CycleThe following table lists the Part No. and the standard replacement cycle

4-34.2 How to check the Abrasion Counter4REPLACEMENT OF CONSUMABLES4.2 How to check the Abrasion Counter Checking the counter from the Operator panel

4-44.3 Replacing the Pad ASSY4.3 Replacing the Pad ASSY1. Remove documents from the stacker. Pull up the lever on the right front of the Upper transpo

4-54.3 Replacing the Pad ASSY4REPLACEMENT OF CONSUMABLES2. Pull the ADF release lever toward you and lift up the ADF sheet guide.3. Press down on the

●xii Safety PrecautionsWARNINGThe following describes important warnings described in this manual.Do not touch the Power cable with wet hands.Do not

4-64.3 Replacing the Pad ASSYPad (cleaning area)Pad ASSYGuide plate

4-74.3 Replacing the Pad ASSY4REPLACEMENT OF CONSUMABLES4. Remove the Pad ASSY from the Guide plate by pushing the removal metal scroll down and then

4-84.3 Replacing the Pad ASSY5. Attach a new Pad ASSY by engaging the hooks then pressing scroll into the slot of the Guide plate. 6. Install the Guid

4-94.4 Replacing the Pick Roller Unit4REPLACEMENT OF CONSUMABLES4.4 Replacing the Pick Roller Unit 1. Remove documents from the stacker. Pull up the l

4-104.4 Replacing the Pick Roller Unit2. While pulling the ADF lever toward you, lift up the ADF upper sheet guide. 3. Lift up the Pick roller unit a

4-114.4 Replacing the Pick Roller Unit4REPLACEMENT OF CONSUMABLES4. Install a new Pick roller unit in the reverse order of its removal. 5. Lower the A

4-124.5 Replacing the Brake Roller Unit4.5 Replacing the Brake Roller Unit1. Remove documents from the stacker. Pull up the lever on the right front o

4-134.5 Replacing the Brake Roller Unit4REPLACEMENT OF CONSUMABLES3. Press down on the upper part of the Guide plate with your fingers at the two posi

4-144.5 Replacing the Brake Roller Unit5. Pull the Brake roller toward you to remove it. 6. Install a new Brake roller unit in the reverse order of i

4-154.6 Replacing the Front-side Lamp4REPLACEMENT OF CONSUMABLES4.6 Replacing the Front-side Lamp1. Remove documents from the stacker. Pull up the lev

●xiiiUse this scanner only at the indicated power voltage. Do not connect to multiple-power strips.Wipe any dust from the power plug.Do not install th

4-164.6 Replacing the Front-side Lamp2. Pull down the Glass sheet guide tab and open the Glass sheet guide. This picture is side View.Glass sheet guid

4-174.6 Replacing the Front-side Lamp4REPLACEMENT OF CONSUMABLES3. Pulling down the Lamp socket covers attached to the both end of the Lamp sockets an

4-184.6 Replacing the Front-side Lamp5. Install a new Lamp in the reverse order of the removal. Make sure that the clear portion of the Lamp faces do

4-194.6 Replacing the Front-side Lamp4REPLACEMENT OF CONSUMABLES6. Attach the Lamp socket cover in the reverse order of its removal. Make sure that th

4-204.7 Replacing the Back-side Lamp4.7 Replacing the Back-side Lamp1. Pull and open the side cover. CAUTIONNever replace the Lamp without turning off

4-214.7 Replacing the Back-side Lamp4REPLACEMENT OF CONSUMABLES2. Hold the handle (blue part) and pull out the Back-side lamp unit. 3. Rotate the Lamp

4-224.7 Replacing the Back-side Lamp4. Attach a new Lamp following the reverse order of old lamp removal. Make sure that the clear portion of the Lamp

4-234.7 Replacing the Back-side Lamp4REPLACEMENT OF CONSUMABLES5. Install the Back-lamp unit in the reverse order of its removal. Make sure the connec

4-244.7 Replacing the Back-side Lamp

5-15 SOLVING COMMON PROBLEMSThis chapter describes how to clear document jams, how to remedy other problems, items to be checked before contacting an

●xivTurn the scanner OFF if it is damaged.Do not put liquids inside the scanner.Do not touch the inside of the scanner.If the scanner is damaged for a

5-25.1 Clearing Document Jams5.1 Clearing Document JamsIf a document jam occurs during feeding, follow the procedure below to remove the jammed docume

5-35.1 Clearing Document Jams5SOLVING COMMON PROBLEMS2. While pulling the ADF lever toward you, lift up the ADF upper sheet guide.3. Remove the jammed

5-45.1 Clearing Document Jams Removing jams from the eject mechanism. 1. Remove the documents on the stacker. Pull up the lever on the right front of

5-55.1 Clearing Document Jams5SOLVING COMMON PROBLEMS Document separation force adjustment If the following error occurs frequently, adjust the brake

5-65.1 Clearing Document JamsDocument separation force setup items are as follows. If Mis-pick occurs frequently, adjust the Pick roller rotation spee

5-75.1 Clearing Document Jams5SOLVING COMMON PROBLEMSPick speed Mis-pick occurs frequently Fast (Factory default) Decrease pick speedMid Slow ATTENTI

5-85.2 Troubleshooting5.2 TroubleshootingThis section describes common troubles during usage and how to remedy the troubles. Before you ask for repair

5-95.2 Troubleshooting5SOLVING COMMON PROBLEMS(* ) Press any button except Power button. The Power button will not work to wake up the scanner. Press

5-105.2 Troubleshooting NOYESYES NO NOAre the documents loaded properly on the hopper? Is the upper transport unit closed correctly? Load the document

5-115.2 Troubleshooting5SOLVING COMMON PROBLEMS NO NO YESHas the scanner been selected by multiple applications ?Close all applications and select the

●xvCAUTIONThe following describes important cautions described in this manual.Do not install the scanner on unstable surfaces.Firmly insert the power

5-125.2 Troubleshooting(* 1) For the details on how to set SCSI ID, refer to the section “7.3 Setup Mode Details”, “19. Setting SCSI ID” on page 7-48.

5-135.2 Troubleshooting5SOLVING COMMON PROBLEMSNOYESYES NO NOIs "Photo"mode selected?Is halftoning or dithering processing selected? Select

5-145.2 Troubleshooting(* 1)If Binary mode is used, the scanned image of a photograph may not be good. Depending on the applications used, the method

5-155.2 Troubleshooting5SOLVING COMMON PROBLEMS(* 1)If halftone mode is used, the scanned image of text or line art may not be good. Depending on the

5-165.2 Troubleshooting(* ) For the details of cleaning, refer to "3 DAILY CARE" on page 3-1. YES NO NO YESIs the document path, the Remova

5-175.2 Troubleshooting5SOLVING COMMON PROBLEMS(* 1)For the cleaning of the removable sheet guide, and the glass sheet guide, please refer to "3

5-185.2 Troubleshooting(* ) For the message display contents and the error recovery method, refer to “APPENDIX 3 MESSAGES ON THE OPERATOR PANEL”, “E

5-195.2 Troubleshooting5SOLVING COMMON PROBLEMS YES NOThe scanner operation is normal. Contact an authorized FUJITSU Scanner service provider.Symptom

5-205.2 Troubleshooting NO YES YES NO NODo the documents satisfy the conditions described in "6.2 Document Quality," "Precautions"

5-215.2 Troubleshooting5SOLVING COMMON PROBLEMS NO NO NO YES YESIs the Pad ASSY dirty? Is the Pad ASSY worn out? Clean the Pad ASSY. (* 3)Replace the

●xviBefore moving the scanner, disconnect the power plug from the power outlet.Protect the scanner from static electricity.Do not use aerosol sprays n

5-225.2 Troubleshooting(* 1) For the details on required conditions, refer to the section "6.2 Document Quality" on page 6-3.(* 2) For the

5-235.2 Troubleshooting5SOLVING COMMON PROBLEMS YES NO YES YES NODo the documents satisfy the conditions described in "6.2 Document Quality,"

5-245.2 Troubleshooting(* 1)For the details on required conditions, refer to the section "6.2 Document Quality" on page 6-3.(* 2)For the de

5-255.2 Troubleshooting5SOLVING COMMON PROBLEMSWindows 98/Windows Me/Windows 2000/Windows XP NO YESDid you adjust the offset (position to start scanni

5-265.2 Troubleshooting YES YES YES NO NOIs the power turned on?Has there been an incomplete driver installation in the past?Turn on the power.Re-inst

5-275.2 Troubleshooting5SOLVING COMMON PROBLEMS(* 1)For the details on how to install the SCSI card driver and updates, refer to section 2.2 in the “f

5-285.2 Troubleshooting(* ) For the details on how to install FUJITSU TWAIN, refer to “FUJITSU TWAIN32 Scanner Driver (Scanner Utility for Microsoft W

5-295.3 Before Contacting a Service Provider5SOLVING COMMON PROBLEMS5.3 Before Contacting a Service Provider Please check the following items before c

5-305.3 Before Contacting a Service Provider Error Descriptions Problem at the time of PC connection.  Document feed trouble Imaging quality troub

5-315.4 Labels on the Scanner5SOLVING COMMON PROBLEMS5.4 Labels on the ScannerThis section describes how to check the labels on the scanner. The posi

●xviiDisconnect the power plug from the power outlet when the scanner is not used for a long period of time.Do not install the scanner in the direct s

5-325.4 Labels on the Scanner

6-16 ADF DOCUMENT SPECIFICATIONSThis chapter describes the sizes and qualities of documents required for the satisfactory performance of the scanner.

6-26.1 Document Size6.1 Document Size The following shows the supported document sizes. Maximum MinimumA B A B297 mm 432 mm 74 mm 74 mm11.7 in. 17 in.

6-36.2 Document Quality6ADF DOCUMENT SPECIFICATIONS6.2 Document Quality This section describes the types and thickness of documents this scanner suppo

6-46.2 Document Quality PrecautionsThe following documents may not be scanned successfully. - Document of non-uniform thickness (e.g. envelopes)- Wri

6-56.2 Document Quality6ADF DOCUMENT SPECIFICATIONSATTENTION• Carbonless paper contains chemical substances that may damage the Pad ASSY or rollers (e

6-66.3 Hole-punching Prohibited Areas6.3 Hole-punching Prohibited AreasPunched holes in the shaded areas may cause errors. For job separation sheet re

6-76.4 Print Prohibited Area6ADF DOCUMENT SPECIFICATIONS6.4 Print Prohibited AreaIf there is printing in area A, the document size may be mis-detected

6-86.5 Background Color Areas6.5 Background Color AreasPaper white detection is performed in the shaded area as shown in the Figure below. The top 3mm

6-96.6 Job Separation Sheet6ADF DOCUMENT SPECIFICATIONS6.6 Job Separation Sheet 1. Shape The following shows the typical format of the job separation

●xviii FUJITSU Group OfficesPlease send your comments on this manual or on FUJITSU products to the following addresses: FUJITSU COMPUTER PRODUCTS OF

6-106.7 Hopper Capacity6.7 Hopper Capacity The number of pages that can be loaded on the Hopper depends on the paper size and the ream weight. This in

7-17 OPERATOR PANEL MENUSThis chapter explains the setup mode and the test mode of the scanner. 7.1 Setup Mode ...

7-27.1 Setup Mode7.1 Setup Mode OutlineThere are two types of setup mode: Online setup mode and Offline setup mode.From “Ready“ status, you can enter

7-37.1 Setup Mode7 OPERATOR PANEL MENUS Online setup mode restrictions In Online setup mode, the scanner setup can be changed without turning off the

7-47.1 Setup Mode Function of buttons in setup mode Transitions of screens in setup mode Refer to the next page LCD screen transitions chart for set

7-57.1 Setup Mode7 OPERATOR PANEL MENUS(From screen !30)<<Continue on screen !09 on the next page>>0S1epratThi n kThi c!iona=gggcc0P2repic

7-67.1 Setup Mode<<Continue on screen !17 on the next page>>09 NCa!BTrsPAabr//Pkkceiionda09NCR!xTxc=-i1PxetexxsxkN/o09NCR!xTxa=-r2Bxetexxs

7-77.1 Setup Mode7 OPERATOR PANEL MENUS<<Continue on screen !26 on the next page>>17 erFr!eedtgCnha/YesN?oey17Rr!et-1epS1ty=17 Rr!et-2meT4

7-87.1 Setup ModeHINTThe menu screens with dotted line frame appear only when the scanner is in the Offline setup mode.HINTScreen 22 and screen 23 app

7-97.2 Setup mode functions7 OPERATOR PANEL MENUS7.2 Setup mode functionsThere are 32 items in setup mode as shown in the following.LCD displayDescrip

●xixFUJITSU TAIWAN LTD.19th Fl., No39, Sec.1,Chung-hwa Rd., Taipei, TaiwanPhone: (886-2)2311-2255Fax: (886-2)2311-2277Website: http://tw.fujitsu.com/F

7-107.2 Setup mode functionsLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-lineAbrasionAlarm Specifies the scanners oper

7-117.2 Setup mode functions7 OPERATOR PANEL MENUSLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-lineSkew Check Specifie

7-127.2 Setup mode functionsLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-linePre-pick Enable or disable pre-pick oper

7-137.2 Setup mode functions7 OPERATOR PANEL MENUSLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-lineB.Drop-out Specifie

7-147.2 Setup mode functionsLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-lineBaud Rate Specifies the control data tran

7-157.2 Setup mode functions7 OPERATOR PANEL MENUSLCD display Descriptions Selectable parametersDefault Mode RemarksOn-lineOff-linePower Save Specifie

7-167.3 Setup Mode Details7.3 Setup Mode Details1. Setting the document separation force1) Press (Next button) or (Previous button) and let the scan

7-177.3 Setup Mode Details7 OPERATOR PANEL MENUSHINTIf the following error occurs frequently, change the setting by referring to the explanation on th

7-187.3 Setup Mode Details2. Setting Pre-pick1) Press (Next button) or (Previous button) and let the scanner show <Screen2>. <Screen2> 2

7-197.3 Setup Mode Details7 OPERATOR PANEL MENUS3. Setting Pick Speed 1) Press (Next button) or (Previous button) and let the scanner show <Scree

●xx

7-207.3 Setup Mode Details4. Setting Double-feed detection (document overlapping/thickness) 1) Press (Next button) or (Previous button) and let the

7-217.3 Setup Mode Details7 OPERATOR PANEL MENUS3) At <Screen 4-1> you can enable or disable the Double-feed detection or configure the detecti

7-227.3 Setup Mode DetailsThe available ranges of detection are as follows:Top: 0 (default), 50, 100, 150, 200 (Unit : mm)L: 100 (default), 150, 200 (

7-237.3 Setup Mode Details7 OPERATOR PANEL MENUSBy pressing (Enter button), LCD display changes to <Screen4-5>. <Screen4-5> 8) At <Scr

7-247.3 Setup Mode DetailsATTENTIONWhen a double-feed is detected and the scanning operation is stopped, the last documents in the hopper or the one a

7-257.3 Setup Mode Details7 OPERATOR PANEL MENUS5. Setting Double-feed detection (by document length) 1) Press (Next button) or (Previous button) an

7-267.3 Setup Mode Details3) In case of (2) or (3), by pressing (Enter button), LCD display changes to <Screen5-1>. <Screen5-1> 4) At <

7-277.3 Setup Mode Details7 OPERATOR PANEL MENUS6. Setting Skew Check 1) Pressing (Next button) or (Previous button) and let the LCD show <Screen

7-287.3 Setup Mode Details7. Setting IPC pre-set 1) Pressing (Next button) or (Previous button) and let the LCD show <Screen7>. <Screen7>

7-297.3 Setup Mode Details7 OPERATOR PANEL MENUS Document type and IPC preset pattern *1 to 5 indicates IPC pre-set pattern number. HINTWhen

●xxiINTRODUCTION ... iRegulatory Information ...

7-307.3 Setup Mode Details Validity of scan parameterHINTThis setting is invalid in grayscale mode or in color mode. Pre-sets are valid only in binar

7-317.3 Setup Mode Details7 OPERATOR PANEL MENUS8. Setting Consumables Replacement Message1) Pressing (Next button) or (Previous button) and let the

7-327.3 Setup Mode Details3) At <Screen8-1>, press (Left arrow button) or (Right arrow button) to select consumable error process. By pressing

7-337.3 Setup Mode Details7 OPERATOR PANEL MENUS9. Abrasion counter (Abrasion CNT) reset 1) Pressing (Next button) or (Previous button) and let the

7-347.3 Setup Mode Details3) By pressing (Enter button), LCD display changes to <Screen9-1>, <Screen9-2>, <Screen9-3>, <Screen9

7-357.3 Setup Mode Details7 OPERATOR PANEL MENUS4) At <Screen9-1> , <Screen9-2>, <Screen9-3>, <Screen9-4> or <Screen9-5>

7-367.3 Setup Mode Details10. Setting Short document scan mode(Paper Length setup) 1) Press (Next button) or (Previous button) and let the LCD displ

7-377.3 Setup Mode Details7 OPERATOR PANEL MENUS11. Setting Language1) Press (Next button) or (Previous button) and let LCD display <Screen11>

7-387.3 Setup Mode Details12. Setting Front-side background color 1) Press (Next button) or (Previous button) and let LCD display <Screen12>.&

7-397.3 Setup Mode Details7 OPERATOR PANEL MENUS13. Setting Back-side background color 1) Press (Next button) or (Previous button) and let LCD displ

●xxii4 REPLACEMENT OF CONSUMABLES ... 4-1Consumables and Replacement Cycle ... 4-2How to check the Abrasion Counter ...

7-407.3 Setup Mode Details14. Setting Front-side dropout color 1) Press (Next button) or (Previous button) and let LCD display <Screen14>.<

7-417.3 Setup Mode Details7 OPERATOR PANEL MENUS15. Setting Back-side dropout color 1) Press (Next button) or (Previous button) and let LCD display

7-427.3 Setup Mode Details16. Setting Pick retry 1) Press (Next button) or (Previous button) and let LCD display <Screen16>. <Screen16>

7-437.3 Setup Mode Details7 OPERATOR PANEL MENUS4) At <Screen16-2>, specify the number of pick retries. By pressing (Left arrow button), the nu

7-447.3 Setup Mode Details17. Setting Feed retry 1) Press (Next button) or (Previous button) and let LCD display <Screen17>. <Screen17>2

7-457.3 Setup Mode Details7 OPERATOR PANEL MENUS4) In <Screen17-2>, specify the number of retries. By pressing (Left arrow button), the number

7-467.3 Setup Mode Details18. Setting Manual Feed mode 1) Press (Next button) or (Previous button) and let LCD display <Screen18>. <Screen1

7-477.3 Setup Mode Details7 OPERATOR PANEL MENUSPress (Enter button) then <Screen18-2> is displayed. <Screen18-2> 4) At <Screen18-2>

7-487.3 Setup Mode Details19. Setting of SCSI ID 1) Press (Next button) or (Previous button) and let LCD display <Screen19>. <Screen19>

7-497.3 Setup Mode Details7 OPERATOR PANEL MENUS20. Setting of Product ID (Scanner model number) 1) Press (Next button) or (Previous button) and let

●xxiii9 SCANNER SPECIFICATIONS... 9-1Basic Product Specifications ... 9-2Installation Specifi

7-507.3 Setup Mode Details21. Setting SCSI bus width 1) Press (Next button) or (Previous button) and let LCD display <Screen21>. <Screen21&

7-517.3 Setup Mode Details7 OPERATOR PANEL MENUS22. Setting Interface 1) Press (Next button) or (Previous button) and let LCD display <Screen22&g

7-527.3 Setup Mode Details23. Setting Baud rate of TPS interface 1) Press (Next button) or (Previous button) and let LCD display <Screen23>. &

7-537.3 Setup Mode Details7 OPERATOR PANEL MENUS24. Selection of Imprinter In this scanner, you can install the Pre- and Post-imprinters (optional acc

7-547.3 Setup Mode Details4) At <Screen24-1>, press (Left arrow button) or (right arrow button), and select the setting you want to give prior

7-557.3 Setup Mode Details7 OPERATOR PANEL MENUS25. Setting Imprinter numbering 1) Press (Next button) or (Previous button) and let LCD display <

7-567.3 Setup Mode Details3) At <Screen25-1>, press (Left arrow button) or (Right arrow button) and let your choice of number of digits blink.

7-577.3 Setup Mode Details7 OPERATOR PANEL MENUS5) At <Screen25-3>, you can specify if the numbering should be initialized to the specified init

7-587.3 Setup Mode Details26. Reset the Ink remain counter of imprinter. If the following message comes up, prepare the new Print cartridge. If no fur

7-597.3 Setup Mode Details7 OPERATOR PANEL MENUS2) At <Screen26>, to choose to reset the ink counter, press (Left arrow button) and select [Res

●xxiv

7-607.3 Setup Mode Details27. Setting Power save mode1) Press (Next button) or (Previous button) and let LCD display <Screen27>. <Screen27&

7-617.3 Setup Mode Details7 OPERATOR PANEL MENUS28. Setting Brightness1) Press (Next button) or (Previous button) and let LCD display <Screen28&g

7-627.3 Setup Mode Details29. Confirming Imprinter installation1) Press (Next button) or (Previous button) and let LCD display <Screen29>. <

7-637.3 Setup Mode Details7 OPERATOR PANEL MENUS30. Setting Lamp Control1) Press (Next button) or (Previous button) and let LCD display <Screen30

7-647.3 Setup Mode Details31. Setting Auto crop width When the scanner is set to scan in the Black & White mode and to detect a paper size automat

7-657.3 Setup Mode Details7 OPERATOR PANEL MENUS32. Setting the offset (starting position) for automatic size detection of the back side image1) Press

7-667.3 Setup Mode Details4)At <Screen32-2>, press (Left arrow button) or (Right arrow button) to adjust the vertical starting position. 5) P

7-677.4 Test Mode Overview7 OPERATOR PANEL MENUS7.4 Test Mode Overview OutlineScanner operation can be checked in the offline test mode. To enter th

7-687.4 Test Mode Overview Button functions in test modeButton name Function [Next]Displays the next menu item without saving the change. Referred t

7-697.4 Test Mode Overview7 OPERATOR PANEL MENUS Transition of screens in test mode Refer to the next page.The LCD screen transition chart in the fol

1-11 BASIC SCANNER OPERATIONSThis chapter describes basic scanner operations.This chapter explains operations using the screens of Windows XP. Dependi

7-707.4 Test Mode OverviewContinue to screen T03 on the next pageetSA4PW2B00etRESLIOON2TU00etReaiMdodeCOgnRLOetPAPRSEIZEAP4etSIMLEXP/DPLEXUSIMLEXPSA4P

7-717.4 Test Mode Overview7 OPERATOR PANEL MENUS Contents of test mode settingLCD display DescriptionsSingle feed Scans a sheet of document without

7-727.5 Test Mode Details7.5 Test Mode Details1. Single feed test modeWithout connecting to a PC, the scanner's whole mechanism’s operation can b

7-737.5 Test Mode Details7 OPERATOR PANEL MENUSAt this screen, press (Left arrow button) or (Right arrow button) and select simplex or duplex. Press

7-747.5 Test Mode Details(3)At <Screen50-2>, select the third item from left, [BW] in the sample screen, and press (Enter button). Then the LCD

7-757.5 Test Mode Details7 OPERATOR PANEL MENUS<Screen50-3> 6) At <Screen50-3>, press (Left arrow button) or (Right arrow button) and:Se

7-767.5 Test Mode Details2. Multi feed test modeWithout connecting to a PC, the scanner's whole mechanism’s operation can be checked. In this tes

7-777.5 Test Mode Details7 OPERATOR PANEL MENUS5) Specify the scanning conditions. (1)At <Screen51-2>, select the left most item, [S] in the sam

7-787.5 Test Mode DetailsPress (Enter button) and confirm the setting.Then <Screen51-2> is redisplayed. (3)At <Screen51-2>, select the th

7-797.5 Test Mode Details7 OPERATOR PANEL MENUSAt this screen, press (Left arrow button) or (Right arrow button) and select scan resolution. Followi

1-21.1 Turning the Scanner ON1.1 Turning the Scanner ON Turning the power on1. Press "I" side of the main line switch located on the back

7-807.5 Test Mode Details7) Press (Start button). Scanning operation starts with or without imprinter test. HINTTo quit the test, press (Stop button)

7-817.5 Test Mode Details7 OPERATOR PANEL MENUS3. Display the cumulative lamp-on timeYou can check the cumulative number of lamp-on time. 1) Press (Ne

7-827.5 Test Mode Details4. Option installation status displayYou can check the options installation status.1) Press (Next button) or (PreviousPrevio

8-18 OPTIONSThis chapter describes options for fi-4860C2. 8.1 Options...

8-28.1 Options8.1 Options The following lists options available for the scanner. For the details please contact FUJITSU scanner dealer where you purch

8-38.2 fi-486PRFR (Pre-imprinter)8OPTIONS8.2 fi-486PRFR (Pre-imprinter) The fi-486PRFR is installed at the front side of the document path, inside of

8-48.3 fi-486PRRE (Post-imprinter)8.3 fi-486PRRE (Post-imprinter) The fi-486PRRE is installed at the rear side of the document path, inside of the sca

8-58.4 fi-486TRK (Thinner paper Roller Kit)8OPTIONS8.4 fi-486TRK (Thinner paper Roller Kit) fi-486TRK provides smooth paper feeding when reading docu

8-68.4 fi-486TRK (Thinner paper Roller Kit)

9-19 SCANNER SPECIFICATIONSThis chapter describes the Scanner Specifications.9.1 Basic Product Specifications...

1-31.1 Turning the Scanner ON1BASIC SCANNER OPERATIONS2. Press the power button on the Operator panel.The power turns on and the green Power LED at t

9-29.1 Basic Product Specifications9.1 Basic Product Specifications(* 1)For details, refer to “Chapter 6 ADF DOCUMENT SPECIFICATIONS” on page 6-1.(* 2

9-39.2 Installation Specifications9 SCANNER SPECIFICATIONS9.2 Installation SpecificationsItem SpecificationDimensions (With hopper and stacker retract

9-49.2 Installation SpecificationsItem SpecificationAmbient condition Device status Operating Not operatingTemperature 15 -- 35 degrees Celsius 59 --

9-59.3 Dimensions9 SCANNER SPECIFICATIONS9.3 Dimensions

9-69.3 Dimensions

●AP-1APPENDIX 1 DROP-OUT COLORA drop-out color is a color that can be eliminated from what the scanner sees.To check the background color of document

●AP-2APPENDIX 2 DOUBLE-FEED (MULTI-FEED) DETECTION CONDITIONSThere are three double-feed (a.k.a. multi feed) detection modes: document thickness, doc

●AP-3- Punched holes are not allowed within 35mm (1.4 inch) of the vertical center line of the document.- The deviation in the amount of the light tra

●AP-4- The deviation in the amount of the light transmitted through background areas must not be less than 10%.HINTThe type and the conditions of docu

●AP-5APPENDIX 3 MESSAGES ON THE OPERATOR PANEL Massages of Scaner Operation Status<Not Ready status>(Initializing) changes to  with progress

●iThank you for purchasing the fi-4860C2 Duplex Color Scanner.The fi-4860C2 is an image scanner designed to scan small to double letter documents in l

1-41.1 Turning the Scanner ON Turning the Power off1. On the Operator panel, press and hold down the Power button for two seconds or longer. 2. Press

●AP-6<Scanning>HINT"xxxx" shows the Batch counter value.<Scanning>HINT"xxxx" shows the Batch counter value.<At Low

●AP-7<Double feed error>(Scanning)The following message is displayed while the scanner is scan-ning continuously in the state where double-feed

●AP-8HINT"xxxx" shows the number of Batch counter value.(Waiting) The following message is displayed while the scanner is waiting in the sta

●AP-9 Error mesage (Temporary error :Check LED blinking)Check LED blinks when the following errors occur except <Hopper empty> and <Mis-pick

●AP-10<ADF cover open> The following message is displayed if the ADF cover is not closed completely. Close the ADF cover completely, to enable s

●AP-11<Skew error> The following message is displayed, When skewed document is fed from the hopper to the ADF. <Hopper is full or Pick

●AP-12<Separation roller > The following message is displayed, when the Separation roller rotates while the Brake roller does not rotate at all.

●AP-13 Alarm message (Hardware error :Check LED illuminated)The following messages are displayed, when an error occurs inside the sccaner. In this ca

●AP-14<Lamp fuse alarm>(Front side)The following message is displayed, when the fuse for the lamp for front side blows out.<Lamp fuse alarm&g

●AP-15<Hopper overrun> The following message is displayed, when the hopper moves over the normal position.<Sensor control error>The follow

1-51.2 Waking the Scanner from the Power Save Mode1BASIC SCANNER OPERATIONS1.2 Waking the Scanner from the Power Save ModeThe Power Save Mode keeps th

●AP-16<Power supply error>The following message is displayed, when an error occurs in the Power supply.<EEPROM Alarm> The following messag

●AP-17<MDC download error>The following message is displayed, when an error occurs dur-ing downloading the firmware to MDC.<Imprinter alarm&g

●AP-18

●IN-1AADF release lever ...3-5ADF upper sheet guide...3-5Adobe Acrobat ...2-3BBack-s

●IN-2EErrors ... 1-6FFeed roller...3-3, 3-18fi-486PRFR...

●IN-3Service provider...5-29Setting Window for FUJITSU TWAIN32 Scanner Driver...1-31Setup mode...

fi-4860C2 Image Scanner Operator’s GuideP3PC-1692-01ENZ0Date published: May, 2006PFU LIMITED• Copying of the contents of this manual in whole or in pa

1-61.3 Basic Operations of the Operator Panel1.3 Basic Operations of the Operator Panel This basic operation include how to enter setup mode and test

1-71.3 Basic Operations of the Operator Panel1BASIC SCANNER OPERATIONS Lifting or lowering the hopperWhen the scanner has no errors (Check LED is not

1-81.3 Basic Operations of the Operator Panel(2) In test mode ([Single feed] or [Multi-feed], the Hopper height changes as follows by pressing (Next

1-91.3 Basic Operations of the Operator Panel1BASIC SCANNER OPERATIONS Clearing the consumables replacement message This scanner has Abrasion counter

1-101.3 Basic Operations of the Operator Panel Using the setup and the test modes.This scanner has the setup mode for customizing the setup condition

1-111.3 Basic Operations of the Operator Panel1BASIC SCANNER OPERATIONS Turning on the power Press (Next button) Press (Prev

1-121.3 Basic Operations of the Operator Panel- Offline setup mode and test modeKeep pressing (Start button) and turn on the power.

1-131.3 Basic Operations of the Operator Panel1BASIC SCANNER OPERATIONS- To enter the test mode, from the [<Mode select>] screen, press (Left a

●ii5. SOLVING COMMON PROBLEMSThis chapter describes how to remedy document jams, scanner troubleshooting, and items to check before contacting the age

1-141.4 Setting up the Hopper1.4 Setting up the Hopper1. Gently flip down the Hopper table by pulling the blue handle.Blue Handle

1-151.5 Setting up the Stacker1BASIC SCANNER OPERATIONS1.5 Setting up the Stacker1. Flip open the stacker.Stacker

1-161.5 Setting up the Stacker2. Push the opened stacker table lock into the scanner to lock it in place. HINTWhen closing the stacker, pull out the s

1-171.6 Setting the Stacker Extension1BASIC SCANNER OPERATIONS1.6 Setting the Stacker Extension1. Hold the center of the blue part of the stacker exte

1-181.7 Loading Documents on the Hopper1.7 Loading Documents on the Hopper 1. Straighten the edges of the documents1) Straighten both sides of the doc

1-191.7 Loading Documents on the Hopper1BASIC SCANNER OPERATIONS3. Load the documents on the hopper. Place the documents face-up on the hopper table.

1-201.7 Loading Documents on the Hopper5. Start up the scanner application and scan the documents. For the details on how to scan using ScandAll 21, r

1-211.8 Inserting Documents Manually1BASIC SCANNER OPERATIONS1.8 Inserting Documents Manually To setup the scanner for Manual Feed Mode: 1. Lift the P

1-221.8 Inserting Documents Manually2. Place documents face-up at the center of the hopper table.3. Adjust the Side guides to the width of the documen

1-231.9 Scanning Documents1BASIC SCANNER OPERATIONS1.9 Scanning Documents For scanning with the VRS, a software provided with the scanner, refer to th

●iii Regulatory InformationFCC RegulationsThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t

1-241.9 Scanning DocumentsThe [Select source] dialog box appears. Select [FUJITSU fi-4860CEAdij] (for TWAIN32 V8, [FUJITSU TWAIN 32]). Then click [Sel

1-251.9 Scanning Documents1BASIC SCANNER OPERATIONS6. Set the scan resolution, document size and other scan conditions, and click the [Scan] button. F

1-261.9 Scanning DocumentsThe image of the scanned document appears on the ScandAll 21 screen. For details on scanning various types of documents, ref

1-271.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS1.10 How to use the Scanner Driver FUJITSU TWAIN32 Scanner DriverFUJITSU TWAIN32 Scann

1-281.10 How to use the Scanner Driver3. Select the scanner to use, then click the [Select] button.Select• [FUJITSU fi-4860CEAdij] for FUJITSU TWAIN32

1-291.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS6. Configure settings for scanning and click the [Scan] button.For details about the se

1-301.10 How to use the Scanner Driver⇒ The images of scanned documents are displayed on the [ScandAll 21] window.Depending on the settings of the ap

1-311.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS● Setting Window for FUJITSU TWAIN32 Scanner Driver.You can perform settings for the FU

1-321.10 How to use the Scanner DriverPaper SizeSelect the size of documents to be scanned from this list.Windows for customizing the paper size will

1-331.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS[Option...] buttonYou can set up the details of optional functions from the window belo

●ivCanadian DOC RegulationsThis digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the Ra

1-341.10 How to use the Scanner Driver FUJITSU ISIS Scanner DriverFUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image s

1-351.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS4. Select [Scan] - [New Batch] on the menu bar.5. Select the profile for scanning.• Whe

1-361.10 How to use the Scanner Driver6. Open the window of ISIS Driver.Select the [Scan] tab and click the [Scanner Settings] on the [Profile Editor]

1-371.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONS8. The [Profile Editor] window appears. Click the [OK] button to return to [New batch]

1-381.10 How to use the Scanner Driver● Configuration Window of FUJITSU ISIS Scanner DriverImage ModeSelect a color mode suitable for the purpose from

1-391.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONSBrightnessSets the brightness of the entire image. Specify the brightness as a number w

1-401.10 How to use the Scanner Driver[Area...] buttonOpens the [Scan Area] dialog box.Specify scan area for the document size.The size can be set by

1-411.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONSOpens the JPEG Settings dialog box. Used for setting the compression rate of JPEG trans

1-421.10 How to use the Scanner DriverQuick SetYou can select a preset pattern for image enhancement. By selecting the one from the list, you can quic

1-431.10 How to use the Scanner Driver1BASIC SCANNER OPERATIONSThis option is used to adjust the density of the white background of documents and corr

●vInternational ENERGY STAR® ProgramAs an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for en

1-441.10 How to use the Scanner DriverDetect Page LengthScans the edge (bottom) of the documents and outputs data adjusted to the document length. Whe

2-12SCANNING VARIOUS TYPES OF DOCUMENTSThis chapter describes how to scan various types of documents.This chapter explains operations using the screen

2-22.1 Scanning Documents with different widths2.1 Scanning Documents with different widthsWhen you scan a batch of documents with different widths, y

2-32.2 Saving Scanned Images in PDF Format2SCANNING VARIOUS TYPES OF DOCUMENTS2.2 Saving Scanned Images in PDF FormatIf you would like to save scanned

2-42.2 Saving Scanned Images in PDF FormatUsing ScandAll 21Following shows the procedure for saving scanned images in PDF format.1. Load the document

2-52.2 Saving Scanned Images in PDF Format2SCANNING VARIOUS TYPES OF DOCUMENTS4. Select the scan resolution, document size and other scanning conditio

2-62.2 Saving Scanned Images in PDF Format6. Save the scanned image by selecting file name and path.For details, refer to ScandAll 21 Help. Using Ad

2-72.2 Saving Scanned Images in PDF Format2SCANNING VARIOUS TYPES OF DOCUMENTS4. Select [FUJITSU fi-4860CEAdij] at [Scanner] and click [Scan] button.

2-82.2 Saving Scanned Images in PDF Format6. When scanning is finished, click the [Done] button. The scanned image is displayed.7. Select [Save as] o

2-92.3 Selecting a Color to drop out2SCANNING VARIOUS TYPES OF DOCUMENTS2.3 Selecting a Color to drop out A selected color (red, green or blue) can b

●viAbout the use of mercuryTo avoid unexpected injuries; • Do not put the substance contained in the lamp in your mouth as it has mercury.• Do not bre

2-102.3 Selecting a Color to drop out2. Select the color to drop out from [Dropout Color] under [More]. For example, if the document contains black te

2-112.4 Skipping blank Pages2SCANNING VARIOUS TYPES OF DOCUMENTS2.4 Skipping blank PagesThe following shows examples for changing settings in the [TWA

2-122.4 Skipping blank Pages3. Select [Ram Cache] from the [Cache Mode] menu under [Caching].4. By using the slider control under [Blank Page Skip], s

2-132.5 Detecting Double-Feeds (Multi-Feeds)2SCANNING VARIOUS TYPES OF DOCUMENTS2.5 Detecting Double-Feeds (Multi-Feeds)"Double-feed" (also

2-142.5 Detecting Double-Feeds (Multi-Feeds)3. Select the detection conditions from [Double Feed Detection] (or [Multifeed Detection]) under [ADF Opti

2-152.6 Correcting skewed Documents2SCANNING VARIOUS TYPES OF DOCUMENTS2.6 Correcting skewed DocumentsYou can set the scanner so that skew of document

2-162.6 Correcting skewed Documents3. Select the [Automatic Page Size Detection] from the [Automatic Size and Skew Detection] menu.4. Click the [OK] b

3-13 DAILY CAREThis chapter describes how to clean the scanner. 3.1 Cleaning Materials and Areas Requiring Cleaning ...3-23.2 Cleaning the Pad

3-23.1 Cleaning Materials and Areas Requiring Cleaning3.1 Cleaning Materials and Areas Requiring Cleaning Cleaning materials * 1) For the purchase of

3-33.1 Cleaning Materials and Areas Requiring Cleaning3DAILY CARE Locations requiring Cleaning and Cleaning CycleThe following shows the standard cle

●viiTrademarksMicrosoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries.ISIS, Q

3-43.1 Cleaning Materials and Areas Requiring CleaningATTENTIONThe scanner must be cleaned more frequently if you scan any of the follow-ing types of

3-53.2 Cleaning the Pad3DAILY CARE3.2 Cleaning the Pad1. Remove documents from the stacker. Pull up the lever on the right front of the Upper transpor

3-63.2 Cleaning the Pad3. Press down on the upper part of the Guide plate with your fingers at the two positions shown and then rotate the plate towar

3-73.2 Cleaning the Pad3DAILY CARE4. Wipe the translucent rubber part of the Pad ASSY using a lint free cloth moistened with cleaner F1. 5. Install th

3-83.3 Cleaning the Rollers3.3 Cleaning the Rollers Cleaning the rollers with the cleaning sheet1. Set the Side guide for B4 size width. 2. Set the

3-93.3 Cleaning the Rollers3DAILY CARE6. When [Hopper Empty] is displayed, press (Stop button). 7. Place the same cleaning sheet on the hopper table w

3-103.3 Cleaning the Rollers Cleaning the Pick Rollers and the Separation Roller1. Remove documents from the stacker. Pull up the lever on the right

3-113.3 Cleaning the Rollers3DAILY CARE2. While pulling the ADF lever toward you, lift up the ADF upper sheet guide. 3. Slide the Pick roller unit to

3-123.3 Cleaning the Rollers4. Wipe both Pick rollers (2 positions) and the Separation roller using a clean lint free cloth moistened with cleaner F1.

3-133.3 Cleaning the Rollers3DAILY CARE5. Install the Pick roller unit in the reverse order of its removal. 6. Lower the ADF upper sheet guide careful